|
Post by Junior on Apr 9, 2006 10:26:08 GMT -4
It is time to unvail our new project....we are going to build a new camaro. This time around we are going to cut, tin, and tub add a whole frame and some ladder bars and a ford 9 inch rear end...not sure if this will be ready for this season due to time and money or not even sure at this point if all this will be done before the first time we take the car to the track. I will add a pic later of the car. OHHH and if this is done in time for sydney opener I think maybe the green camaro will be seen with a new driver.
|
|
|
Post by Junior on Apr 9, 2006 19:12:29 GMT -4
this is a pic of the old car which will still be ran after the new one is ready. Still deciding wether to go with a new engine or stay with what we have in it for now.
|
|
|
Post by Junior on Aug 5, 2006 8:21:30 GMT -4
We will be starting this project soon we never realized what kind of work goes into this and we had to do a bit more planning. but we are hoping maybe it will see the august races at cape breton dragway if not the sept races.
|
|
|
Post by Junior on Jun 27, 2007 20:35:57 GMT -4
Well we have got things under way bit by bit but we did not stay with the 86 we went with our green camaro we originaly raced
|
|
|
Post by Junior on Jun 27, 2007 20:59:04 GMT -4
this is where we are at we are going to tackle the ladder bars
|
|
|
Post by Junior on Jun 27, 2007 21:02:46 GMT -4
.
|
|
|
Post by Junior on Jul 15, 2007 18:12:24 GMT -4
.
|
|
|
Post by Junior on Jul 15, 2007 18:13:20 GMT -4
.
|
|
|
Post by Junior on Jul 15, 2007 18:15:30 GMT -4
We got some more done with the car all the frames are welded into place and the roll bar is almost all in except for the support beams for the main hoop
|
|
|
Post by ChipperChapman1090 on Jul 26, 2007 22:18:08 GMT -4
are those stick welds on the cage?
|
|